Amber Lens LED Flex Mount Turn Signal - KTM / FE / FE-S

Ultra-brite LED turn signals with a flexible mounting shaft. Include a small window on the side for increased visibility. Shaped similar to the factory KTM EXC turn signal only smaller and more flexible.

These turn signals are labeled with the E mark on the lens (ECE approved).

• 2007-22 KTM EXC (SEE NOTE BELOW)
• 2014-16 Husqvarna FE-S Models (SEE NOTE BELOW)
• 2017-19 Husqvarna FE Models (SEE NOTE BELOW)
• 2020-22 Husqvarna FE-S Models (SEE NOTE BELOW)

• 2007-22 KTM EXC (SEE NOTE BELOW)
• 2014-16 Husqvarna FE-S Models (SEE NOTE BELOW)
• 2017-19 Husqvarna FE Models (SEE NOTE BELOW)
• 2020-22 Husqvarna FE-S Models (SEE NOTE BELOW)

• If installing on a 07-22 KTM EXC, a 2014-16 Husqvarna FE-S, a 2017-19 Husqvarna FE, or a 2020 Husqvarna FE-S you may also need parts 22-298 and 22-300. (SEE BELOW)
•  
• *If you plan to use LED turn signals on the front AND rear, then you will need to install the 22-298 AND the 22-300.
•  
• *If running one set of LED and one set of standard bulb turn signals you do not need the 22-298 nor are you required to install the 22-300 smart flasher.
  In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the 22-300.